WELDING TABLE & TOOLING PACKAGES

Your work.
Your setup.

The table, the support, the right tools.
Five starting points. Configured around the work you do.

Find your package Get a quote
NWT D28 welding table displayed with clamping and locating tools
D28 reference

Reference configuration shown. Final contents follow your quotation.

01

Your table.Size and material for your work.

02

Your support.Legs and a suitable working height.

03

Your tooling.Position, support and clamp your parts.

FIVE WAYS TO START

Find your workshop’s fit.

Start with the work you do. Refine the table, legs and tools with us.

D28 table and tooling set 1 reference configuration

Package 01

Standard

Small parts & first setups

A practical starting point for brackets, small frames and one-off fabrication.

Suggested table size
1200 × 800 mm
Tooling focus
Basic locating & clamping
Explore the configuration

Start with stops and squares to position your part, then select clamps and matching bolts for the job.

Reference 1200 × 800 mm D28 tabletopReference tabletop ↗Adjustable square-tube welding table legsLeg option ↗

One table with a matched leg set. Material, working height, accessory models and quantities are confirmed in your quote. Images show reference configurations.

Get package quote Configured to order
D28 table and tooling set 2 reference configuration

Package 02

Plus

Everyday fabrication

A versatile starting point for frames, railings and the varied work that comes through your workshop.

Suggested table size
2000 × 1000 mm
Tooling focus
Versatile tooling for varied jobs
Explore the configuration

Choose a broader mix of clamps, stops and angles to accommodate different workpiece shapes.

Reference 2000 × 1000 mm D28 tabletopReference tabletop ↗Adjustable square-tube welding table legsLeg option ↗

One table with a matched leg set. Material, working height, accessory models and quantities are confirmed in your quote. Images show reference configurations.

Get package quote Configured to order
D28 table and tooling set 3 reference configuration

Package 03

Pro

Repeat parts & batch work

Plan your locating points and clamping positions around recurring parts and your production sequence.

Suggested table size
2400 × 1200 mm
Tooling focus
Repeatable locating & multiple clamps
Explore the configuration

Plan stops, squares, clamps and supports for each fixture station. Tool quantities follow your locating and clamping points.

Reference 2400 × 1200 mm D28 tabletopReference tabletop ↗Adjustable square-tube welding table legsLeg option ↗

One table with a matched leg set. Material, working height, accessory models and quantities are confirmed in your quote. Images show reference configurations.

Get package quote Configured to order
D28 table and tooling set 4 reference configuration

Package 04

Pro Max

Large frames & assemblies

A starting point for larger assemblies, with table and support arrangements reviewed around your workpiece.

Suggested table size
3000 × 1500 mm
Tooling focus
Support layout & extended fixturing
Explore the configuration

Review workpiece weight, overhang and access before selecting clamps, larger angles, supports and extensions. Capacity is confirmed for the proposed setup.

Reference 3000 × 1500 mm D28 tabletopReference tabletop ↗Adjustable square-tube welding table legsLeg option ↗

One table with a matched leg set. Material, working height, accessory models and quantities are confirmed in your quote. Images show reference configurations.

Get package quote Configured to order
D28 table and tooling set 5 reference configuration

Package 05

Ultra Max

Table & Tooling Set 5

Build your setup around the D28 Tooling Set 5 reference. Select a table and refine the tools for your work.

Suggested table size
2000 × 1000 mm
Tooling focus
D28 Tooling Set 5 reference
Explore the configuration

Review the table, legs and Tooling Set 5 together. Final locating tools, clamps, supports and locking bolts are specified in your quotation.

Reference 2000 × 1000 mm D28 tabletopReference tabletop ↗Adjustable square-tube welding table legsLeg option ↗

One table with a matched leg set. Material, working height, accessory models and quantities are confirmed in your quote. Images show reference configurations.

Get package quote Configured to order

All five packages are configurable. D28 is shown; D16 is available on request, subject to confirmation. Suggested sizes are starting points, not fixed specifications.

A clearer choice.
Side by side.

Compare the starting configurations. Every package is quoted individually.

Swipe the comparison to see all five packages.

Compare five configurable welding table packages
Your prioritiesPackage 01Standard ↗Package 02Plus ↗Package 03Pro ↗Package 04Pro Max ↗Package 05Ultra Max ↗
Best forSmall parts & first setupsEveryday fabricationRepeat parts & batch workLarge frames & assembliesTable & Tooling Set 5
Suggested size1200 × 800 mm2000 × 1000 mm2400 × 1200 mm3000 × 1500 mm2000 × 1000 mm
Tooling focusBasic locating & clampingVersatile tooling for varied jobsRepeatable locating & multiple clampsSupport layout & extended fixturingD28 Tooling Set 5 reference
Next stepGet quote ↗Get quote ↗Get quote ↗Get quote ↗Get quote ↗

Across all packagesSteel or cast iron selected with your quote.

Compatible table, legs and tools, with working height and quantities confirmed for your setup.

LET’S PLAN YOUR SETUP

Your next setup
starts here.

Tell us what you make. We’ll help you choose a table and build a tooling list around it.

  1. Tell us about the jobPart dimensions, weight, batch size and destination.
  2. Review the configurationTable, legs, working height and tooling.
  3. Receive your quotationConfirm the configuration and delivery details.
[email protected]

We will recommend a package based on your project.

    Add specifications or a phone number Optional

    One PDF, JPG or PNG file, up to 5 MB.

    For CAD files, multiple drawings or larger files, paste a download link below or email [email protected].

    We use your details to respond to this request. Read our Privacy Policy.

    No payment required.

    Our team will review your requirements and reply by email. If you do not see our reply, please check your spam folder.

    A few things to know.

    Before we put your configuration together.

    Can I change the table size or material?

    Yes. The sizes shown are suggested starting points. Tell us your workpiece dimensions and material preference so we can quote the appropriate steel or cast-iron model.

    Are D16 and D28 tools interchangeable?

    No. Table holes, bolts and tooling must use a compatible system. We match the components in your quotation. Tell us if you need to use existing tools.

    Can I add or remove tooling?

    Yes. Tool selection and quantities can be adjusted around your locating and clamping points. Your itemized list is confirmed before you order.

    Are the photos an exact packing list?

    No. They show reference tables, leg options and tooling examples. Your quotation specifies the exact models and quantities included.

    Can you adjust the working height?

    Tell us your preferred finished table height. We will confirm a suitable leg arrangement with the selected tabletop.

    How are shipping and lead time confirmed?

    Send your delivery country, postal code or destination port with your enquiry. Packing, transport terms and lead time are confirmed with your quotation.